Throw Lever Custom Ordering

${{pluginOptions.CustomLeverBasePrice}}

Throw Lever Search

Please enter the diameter of your scope's magnification ring below. If your magnification has a "nub" or protrusion, please select the corresponding box and fill out those details. Refer to the diagram below for measurement designations.

NOTE: If your scope has a magnification ring with unique features, such as a tapered magnification ring or unique geometry, please contact us via [email protected] with photographs.

- This match quality indicates an excellent fit, no modifications should be necessary.

- This match quality indicates a good fit. Diameter is within 50 thousandths of an inch (.05"), and the "nub" will be larger than the one on your magnification ring. Since diameter is the crucial factor in proper tightening, some suggested levers may have a space for a "nub" even if your scope does not have one. There may be very slight lever modification required for a perfect fit, easily accomplished by light sanding. If you're after perfection we also offer custom levers for a small design fee.

Diameter Match Quality	Notch Match Quality	Scope Make	Scope Model	Lever Diameter	Lever Notch Base Width	Lever Notch Top Width	Lever Notch Height
		{{l.ScopeMake}}	{{l.ScopeModel}}	{{l.DiameterInches}}	{{displayValueOrNa(l.NotchBaseWidthInches)}}	{{displayValueOrNa(l.NotchTopWidthInches)}}	{{displayValueOrNa(l.NotchHeightInches)}}	Polymer Lever Pro Series Lever Aluminum Lever

No results were found for your dimensions, but you can order a custom lever using our custom ordering form.

No results were found for your dimensions.