T1000 Hit Indicator, T-Post Mount, and 12″ AR500 Target Package
Magnetospeed T1000 Target Indicator is an ideal solution for the long rang shooter, those preparing for PRS matches, Range Owners.
The T1000 is a rugged target hit indicator with a weatherproof enclosure and long battery life. It was designed to be mounted to the back side of AR500 steel targets 10 inches in width or greater. While mounted, it is in an always-on state waiting for the next shot. The flexible rubber reflector is designed to withstand many impacts before needing to be replaced. Target preparation for the T1000 is quick and simple and it is also easily transferable to multiple targets using common Industrial Velcro tape. The T1000 has multiple operating modes to best suit your shooting situation and is easily seen through any optic that is capable of seeing the target at that shooting distance.
- T1000 Unit (batteries included)
- Spare replacement reflector
- Spare set of mounting velcro straps
- Aiming tool
- Full Instructions
- Quick Start Instructions
Product Instructions Available here
12×12″ square of 3/8″ thick waterjet cut AR500, for the most durable target possible from edge to edge. Cutting via laser or plasma leaves a soft edge on the metal because of the extreme heat involved. One square hole for mounting via a carriage bolt, and fits perfectly on both our T-Post and Enhanced T-Post Mounts. Orders of up to 70lbs ship with a single flat rate price. ALWAYS keep in mind impact velocity and energy prevent target damage. Keep your impact energy around 2500 ft-lbs for 3/8″ thick AR500, and 2750fps or under to prevent pitting of the target. If shooting with pistols under 100 yards, we recommend shooting the side without etching to prevent the slim possibility of a ricochet. We use only mill-certified AR500 for our targets!
Hang targets via a single spring-loaded carriage bolt for enhanced audibility and target ring. Our T-Post Target Mount clamps onto a standard T-post for a durable and extremely economical option on your range. All hardware is certified Grade 8, including the carriage bolt. Targets are hung at approximately a 15 degree angle to direct bullet splatter down, and held under spring tension for a more audible and forgiving impact compared to solid mounted targets.
There are no reviews yet.